Saturday 5 November 2016

Christmas card holder tutorial

 
 
My talented friend Melissa made this Christmas card holder, I thought I'd share it with you in time for the festive season!
 
 
 
Christmas Card Holder by Melissa Nayler
 
An easy to make project using an alternative “flying geese” method, which can be made to your own size requirement, this version holds a minimum of 25 cards (I often double up by placing smaller cards in front of larger ones).  The whole project can be sized down to hold photos.  You don’t need to be a quilter to make this, so have a go, it’s quick, easy and you can embellish any way you wish.  The best thing about this holder is the cards don’t fall out!
 
Requirements - For the main panel, I used a pack of 6 fat quarters, with material left over, however if you’re purchasing fabric:
 
½yd for pockets (there will be enough left over for either the border or binding)
½yd for background (there will be enough left over for either the border or binding)
If you prefer a contrast border and binding ¼yd fabric for each
½yd fabric for backing
Wadding to fit finished panel
Thread, buttons and embellishments, rod for hanging
Cut:
 
For “geese” pockets cut 15 6½” x 3½” rectangles
For remaining pockets cut 10 3½” squares
For background cut 40 x 3½” squares
 
Use ¼” seam allowance throughout, press seams open to avoid bulk.
 
1.       To make the pockets, fold each pocket square in half diagonally and press (take care not to stretch the fabric on the diagonal).  Place pocket on 3½” background square matching corners.  Baste or pin along raw edges to secure.  Repeat for 10 pockets in total, ensure each pair of pockets have triangles facing each.
 
 
 
 2. Press along fold.  Sandwich the folded square between two background squares, rights sides together, with folded edge To make the “geese” pockets, fold each rectangle in half to make a square, right sides outside and lightly ¼” below top edge.  Pin and sew together along one side edge.
3. Press seam open before opening out the “geese” and lightly press, baste base of “geese” to background.
 4. Row 1 – Sew one pocket section to either side of the “geese” section, ensuring pocket triangles are facing, press seams open.
 5. Row 2 - Sew two “geese” sections together, press seams open.

 6.
Sew row 1 to row 2, matching seams, press seams open.
Repeat the above to produce 5 two row sections.

Sew each section together to form a long, narrow panel.

 
7.
    Borders - Cut 2 strips of border fabric 2½” wide by width of panel and add these to top and bottom of panel.  Measure length of panel and cut two strips of border fabric 2½” wide by length of panel (these can be joined if necessary) and add these to both sides.

 
 8.  Cut wadding and backing fabric slightly larger than panel, layer top, wadding and backing fabric and baste together (or stick with fabric spray glue).  Attach buttons at each pocket intersection, ensuring you sew through all 3 layers of panel, I knotted thread at front to make a feature.

 
9. Binding – Cut binding fabric 2” wide and long enough to go around the outside of panel, this does not have to be on the bias as there are no curves involved (you’ll need to join several lengths together).  Fold in half wrong sides together and attach to right side of panel, matching raw edges.    I started under the hanging  loop to hide the join.  At each corner sew to within ¼” of corner, stop and backstitch.  Remove project from machine and fold binding up at 90°.
 
 


  10.    Turn binding back on itself, aligning fold with edge of project, beginning ¼” from edge, continue to sew on binding. Repeat for each corner.
 
 


11. Where the two ends of binding meet, fold one end in to neaten, tuck the un-neatened edge inside the neatened binding and complete the stitching .
 
 


 12. Pop in your cards!

5 comments:

  1. What a brilliant idea no more bits of string and sore thumbs trying to get the thumb tacks into the walls.

    ReplyDelete
  2. Not sure if something got lost in translation but I am confused by step #2. Can anyone clarify for me how to make the "geese" pockets?

    ReplyDelete
  3. something must be missing! I can't figure this out! I followed the cutting directions but when laid out it doesn't work right!

    ReplyDelete
  4. Is there a video tutorial to watch for this? I've cut it all out but a bit confused with instructions. Tried winging it but not successfully. Any help or clearer instructions greatly appreciated.

    ReplyDelete
  5. Hi, I haven't had a problem with the cutting out. The amounts & sizes seem fine and I've made up all the pockets & the geese. What I would say is that it would be best to use a non directional patterned fabric the first time you make this. Also the design shown uses four different fabrics for the pockets, background squares and geese which makes it more difficult to gauge what goes where and there's no mention of this in the pattern. A diagram showing the layout would have been useful.

    Yes there is a problem with the instructions in section 2 for making the geese. The text seems to have been jumbled up. I have added my take on this which I hope Debbie & Melissa don't mind, if you do, sorry, just remove my comment. I will add that this is a bit wordy, I'm not expert in patchwork things nor writing instructions for them! It's just what made it easier for me.


    2. To make geese pockets: fold each of the 15 rectangles (6½” x 3½”) down the centre to form squares and press lightly.
    Take 2 background squares – lay one down with right side facing up and if using a directional pattern place in the direction you want it to lie. Take a "goose" ie a folded square (right side will be facing) lie it on top of the background square matching up the raw edges of the goose to the sides and bottom of the background square. The fold of the goose will be at the top leaving a ¼” seam showing on the background square. Place the second pocket on top (pattern in the same direction as the first) with the right side fabric facing down.
    Stitch ¼” seam down the left side.

    Press the seam to set it then open like a book. Press the seam then turn the inner folded square (goose) over and press the seam again.
    Lift the goose, open it out and place the centre fold down matching to the centre seam you have just stitched to form a triangle. You can see it in the photograph in the pattern instructions under section 3.

    Press it lightly and then tack (baste) it down to the background square.

    Now continue with the pattern instructions. This is as far as I have sewn! Best of luck!

    Hope this helps.

    ReplyDelete